Matt Stein Models
Douglas TBD DEVASTATOR

in 1/500 scale


Far and away the most detailed casting ever offered depicting the TBD DEVASTATOR , in (approximately) 1/500 scale, this Matty's Models item will do justice to the decks of your classic carriers from the Battle of Midway and before. Here is what is offered:

Each casting is delivered still in its native casting wafer (top left), which is quickly and easily removed (top right).

Note actual, corrugated upper wing surfaces on this item. Look closely at all views including the underside (bottom left), to note the following, additional features:
- Gloss-finish canopy/windows
- Raised canopy framing
- Scribed control surface lines
- Recessed engine nacelle opening
- Scored wing-fold-lines (hidden) on wing undersides.
- Locator dimples for landing gear**

Surface details are far easier to read in this picture of completed, painted and decaled examples:

(Note: This resin does not need priming for most applications, however since purple blocks the (yellow) internal reflections of the castings most effectively, a thin undercoat of opaque purple is recommended - even before removing the remnant casting wafer, as it also makes for easier cleanup/preparation.)

Propeller blades are to be provided by the builder*; from readily-available materials. Here, the required props were obtained from 3-bladed rounded-tipped brass props on the Revell Midwy/Forrestal/Essex fret, available from Gold Medal Models .

Landing gear are likewise to be completed by the builder**; from readily-available materials. Here all landing gear were made using our very simple, and recommended, "Glue Drop" construction method.

Decals for these examples came from spare leftover scraps, however Matty's Models recommends using the excellent decals provided by Gold Medal Models; we recommend obtaining both their 350-6D and 700-3D decal sheets which between them will provide an outstanding variety of USN markings - sufficient to complete almost any USN aircraft from the 1920s through the '80s, in scales from 1/350 through 1/700.



PRICING(Excluding ONLY ACTUAL shipping and any applicable taxes)
- 4-Pak (four aircraft): $8.00 USD
- 12 or more aircraft: each $1.90 USD


* Propeller blades to be provided by the builder; from readily-available materials. For photo-etched brass (PE), Matt Stein Models recommends using any of several "1/500 and similar" scale frets made by Gold Medal Models

** Remainder of landing gear to be provided by the builder; from readily-available materials. Instructions for a very easy "Glue Drop" method for completing all required landing gear are available here.


TO ORDER and/or for more details: eMail Matty!
NOTE: Be sure to include in your title "Matty's Models" or "castings" - or something unique to modeling - so as not to lose your message to spam-filtering...
- If you have any trouble, contact me with a post on our sister website:
Model Fleet

Copyright ©2007-8 Matthew M. Stein


(Back Home)