Matt Stein Models
Douglas AD-1 SKYRAIDER
in 1/550 scale
One of Matty's Models' initial releases, on July 4th 2006, is this classic "bubble-top" SKYRAIDER
in (approximately) 1/550 scale; suitable to depict the AD-1, -2, -3 or
A-1H attack aircraft on your 1/500 to 1/600 scale carrier decks. Here
is what is offered:
Each casting is delivered still in its native casting wafer (top left), which is quickly and easily removed (top right). Look closely at all views including the underside (bottom left), to note the following features:
- Gloss-finish canopy/windows
- Raised canopy framing
- Scribed control surface lines
- Underwing (hidden) deeply-scored wing-fold-lines.
- Locator dimples for propeller* hub and landing gear**
Surface details are far easier to read in this example, which has been "purple-primed":
does not need priming for most applications, however purple blocks the
(yellow) internal reflections of the castings most effectively;
therefore a thin coat of opaque purple is recommended - even before
removing the remnant casting wafer, as shown here, for easier
Your assembled units should look (structurally) like this:
And your finished aircraft should look (at least) as good as this:
Click on Image to Enlarge
blades are to be provided by the builder*; from readily-available
materials. Here, the required props were obtained from 4-bladed
rounded-tipped brass props on the Revell Midwy/Forrestal/Essex fret, available from Gold Medal Models .
Landing gear are likewise to be completed by the builder**; from
readily-available materials. Here all landing gear were made using our
very simple, and recommended, "Glue Drop" construction method.
Decals for these examples came from spare leftover scraps, however
Matty's Models recommends using the excellent decals provided by Gold Medal Models; we recommend obtaining both their 350-6D and 700-3D
decal sheets which between them will provide an outstanding variety of
USN markings - sufficient to complete almost any USN aircraft from the
1920s through the '80s, in scales from 1/350 through 1/700.
PRICING(Excluding ONLY ACTUAL shipping and any applicable taxes)
- 4-Pak (four aircraft): $8.00 USD
- 7 or more aircraft: each $1.90 USD
* Rotor- and/or propeller blades to be provided by the builder;
from readily-available materials. For photo-etched brass (PE), Matt
Stein Models recommends using any of several "1/500 and similar" scale
frets made by Gold Medal Models
** Remainder of landing gear to be provided by the builder; from
readily-available materials. Instructions for a very easy "Glue Drop"
method for completing all required landing gear are available here.
TO ORDER and/or for more details: eMail Matty!
NOTE: Be sure to include in your title "Matty's Models" or "castings" - or something unique to modeling - so as not to lose your message to spam-filtering...
- If you have any trouble, contact me with a post on our sister website: Model Fleet
Copyright ©2006-8 Matthew M. Stein